We are in the process of migrating all NASA Earth science data sites into Earthdata from now until end of 2026. Not all NASA Earth science data and resources will appear here until then. Thank you for your patience as we make this transition.Read about the Web Unification Project
Description
The MYD11A1 Version 6 data product was decommissioned on July 31, 2023. Users are encouraged to use the MYD11A1 Version 6.1 data product.
The MYD11A1 Version 6 product provides daily per-pixel Land Surface Temperature and Emissivity (LST&E) with 1 kilometer (km) spatial resolution in a 1,200 by 1,200 km grid. The pixel temperature value is derived from the MYD11_L2 swath product. Above 30 degrees latitude, some pixels may have multiple observations where the criteria for clear-sky are met. When this occurs, the pixel value is a result of the average of all qualifying observations. Provided along with the daytime and nighttime surface temperature bands are associated quality control assessments, observation times, view zenith angles, and clear-sky coverages along with bands 31 and 32 emissivities from land cover types.
The following changes and improvements were implemented for inputs to MODIS Version 6 land surface temperature and emissivity data products: (1) Removed cloud-contaminated LSTs from Level 2 and Level 3 LST products, (2) Updated the coefficient look-up table (LUT) for the split-window algorithm with comprehensive regression analysis of Moderate Resolution Imaging Spectroradiometer (MODIS) simulation data in bands 31 and 32 over wide ranges of surface and atmospheric conditions, especially extending the upper boundary for (LST – Ts-air) in arid and semi-arid regions. Increased the overlap between various sub-ranges to reduce the sensitivity of the algorithm to uncertainties in the input data (i.e., column water vapor and air surface temperature from MYD07), (3) Made minor adjustments in the classification-based surface emissivity values, especially for bare soil and rocks land cover types, (4) Tuned the day/night algorithm by adjusting weights to improve performance in desert regions where the incorporated split-window algorithm may not work well, and (5) Generated new gridded LST&E products with a 6 km spatial resolution for 8-day (MYD11B2) and monthly (MYD11B3) intervals in response to user community requests.
Land Processes Distributed Active Archive Center (LP DAAC)
,
MODIS Adaptive Processing System, Terrestrial Information Systems Laboratory, Earth Sciences Division, Science and Exploration Directorate, Goddard Space Flight Center, NASA (NASA/GSFC/SED/ESD/TISL/MODAPS)
Citation is critically important for dataset documentation and discovery. This dataset is openly shared, without restriction, in accordance with the EOSDIS Data Use and Citation Guidance.
Copy Citation
Citation Copied
Wan, Z., Hook, S., & Hulley, G. (2015). MYD11A1 MODIS/Aqua Land Surface Temperature/Emissivity Daily L3 Global 1km SIN Grid V006 [Data set]. NASA Land Processes Distributed Active Archive Center. https://doi.org/10.5067/MODIS/MYD11A1.006 Date Accessed: 2026-05-01
Wan, Zhengming, Simon Hook, and Glynn Hulley. “MYD11A1 MODIS/Aqua Land Surface Temperature/Emissivity Daily L3 Global 1km SIN Grid V006.” NASA Land Processes Distributed Active Archive Center, 2015. doi:10.5067/MODIS/MYD11A1.006. Date Accessed: 2026-05-01
Wan, Zhengming, et al. MYD11A1 MODIS/Aqua Land Surface Temperature/Emissivity Daily L3 Global 1km SIN Grid V006. NASA Land Processes Distributed Active Archive Center, 2015, doi:10.5067/MODIS/MYD11A1.006. Date Accessed: 2026-05-01
File Naming Convention
MYD11A1.A2002281.h22v10.006.2015161040547.hdf
The file name begins with the Product Short Name (MYD11A1) followed by the Julian Date of Acquisition formatted as AYYYYDDD (A2002281), the Tile Identifier which is horizontal tile and vertical tile provided as hXXvYY (h22v10), the Version of the data collection (006), the Julian Date and Time of Production designated as YYYYDDDHHMMSS (2015161040547), and the Data Format (hdf).
Development of adaptive phenology metrics based on MODIS albedo and temperature observations and its global-scale assessment for glacier mass balance ...
A Century of Reforestation Reduced Anthropogenic Warming in the Eastern
Barnes, Mallory L., Zhang, Quan, Robeson, Scott M., Young, Lily, Burakowski, Elizabeth A., Oishi, A. Christopher., Stoy, Paul C., Katul, Gaby, Novick, Kimberly A.
Modeling urban air temperature using satellite-derived surface temperature, meteorological data, and local climate zone patterna case study in Szeged ...
Greening and browning trend with physio-climatic drivers in Chattogram division, Bangladesh
Rashid, Kazi Jihadur, Tuli, Rajsree Das, Nasher, N. M. Refat, Akter, Tahmina, Karim, K. H. Razimul, Hasan, Md. Mahmudul, Talha, MD, Chowdhury, Shah Imran Ahsan, Musharrat, Mahiba
Physiological and behavioural resistance of malaria vectors in rural West-Africa: a data mining study to address their fine-scale spatiotemporal heterogeneity, drivers, and predictability
Australia's Tinderbox Drought: An extreme natural event likely worsened by human-caused climate change
Devanand, Anjana, Falster, Georgina M., Gillett, Zoe E., Hobeichi, Sanaa, Holgate, Chiara M., Jin, Chenhui, Mu, Mengyuan, Parker, Tess, Rifai, Sami W., Rome, Kathleen S., Stojanovic, Milica, Vogel, Elisabeth, Abram, Nerilie J., Abramowitz, Gab, Coats, Sloan, Evans, Jason P., Gallant, Ailie J. E., Pitman, Andy J., Power, Scott B., Rauniyar, Surendra P., Taschetto, Andrea S., Ukkola, Anna M.
Utility of thermal remote sensing for evaluationof a high-resolution
Hall, Thomas W., Blunn, Lewis, Grimmond, Sue, McCarroll, Niall, Merchant, Christopher J., Morrison, William, Shonk, Jonathan K. P., Lean, Humphrey, Best, Martin
The table below lists the variables contained within a single granule for this
dataset. Variables often contain observed or derived geophysical measurements
collected from a variety of sources, including remote sensing instruments on
satellite and airborne platforms, field campaigns, in situ measurements, and
model outputs. The terms variable, parameter, scientific data set, layer, and band
have been used across NASA’s Earth science disciplines; however, variable is the
designated nomenclature in NASA’s Common Metadata Repository (CMR).
Variable metadata attributes such as Name, Description, Units, Data Type, Fill
Value, Valid Range, and Scale Factor allow users to efficiently process and analyze
the data. The full range of attributes may not be applicable to all variables.
Additional information on variable attributes is typically available in the data,
user guide, and/or other product documentation.
For questions on a specific variable, please use the Earthdata Forum.