N: 60 S: -60 E: -15 W: -135
Description
The data is regional and part of the Group for High Resolution Sea Surface Temperature (GHRSST) Level 3 Collated (L3C) dataset covering the America Region based on retrievals from the Advanced Baseline Imager (ABI) on board the Geostationary Operational Environmental Satellite-16 (GOES-16). The European Organization for the Exploitation of Meteorological Satellites (EUMETSAT), Ocean and Sea Ice Satellite Application Facility (OSI SAF) is producing SST products in near real time from GOES-16 in the Eastern position. GOES-16 Imager level 1 data are acquired at Météo-France/Centre de Météorologie Spatiale (CMS) through the EUMETSAT/EUMETCast system. The GOES-16 ABI enables daytime SST calculations (whereas, previously, GOES East SST was restricted to nighttime conditions). The L3C SST is derived from a three-band (centered at 8.4, 10.3, and 12.3 um) algorithm. The ABI split-window configuration features three bands instead of the two found in heritage sensors (GOES-13). The 8.5-um is used in conjunction with the 10.3-um and 12.3-um bands for improved thin cirrus detection as well as for better atmospheric moisture correction in relatively dry atmospheres. Atmospheric profiles of water vapor and temperature from a numerical weather prediction model, together with a radiative transfer model, are used to correct the multispectral algorithm for regional and seasonal biases due to changing atmospheric conditions. Each 10-minute observation interval is processed at full satellite resolution. The operational products are then produced by remapping over a 0.05-degree regular grid (60S-60N and 135W-15W) SST fields obtained by aggregating the available10-minute SST data into hourly files-hour time, with priority being given to the value closest in time to the product nominal hour. The product format is compliant with the GHRSST Data Specification (GDS) version 2.
Product Summary
Citation
Citation is critically important for dataset documentation and discovery. This dataset is openly shared, without restriction, in accordance with the EOSDIS Data Use and Citation Guidance.
Copy Citation
Documents
USER'S GUIDE
SCIENCE DATA PRODUCT VALIDATION
DATA CITATION GUIDELINES
GENERAL DOCUMENTATION
Variables
Variables are a set of physical properties whose values determine the characteristics or behavior of something. For example, temperature and pressure are variables of the atmosphere. Parameters and variables can be used interchangeably. Variable level attributes provide individual information for each variable.
The Name in this table is the variable name. Fill value indicates missing or undefined data points in a variable. Valid range is the range of values the variable can store. Scale factor is used to increase or decrease the size of an object and can be used to correct for distortion. For questions on a specific variable, please use the Earthdata Forum.
| Name Sort descending | Description | Units | Data Type | Fill Value | Valid Range | Scale Factor |
|---|---|---|---|---|---|---|
| adi_dtime_from_sst | Difference in hours between the ADI and SST data | hour | byte | -128 | -127 to 127 | 0.1 |
| dt_analysis | The difference between this SST and the previous day's SST analysis | kelvin | byte | -128 | -127 to 127 | 0.1 |
| l2p_flags | These flags are important to properly use the data. | N/A | int | N/A | 0 to 15 | 1 |
| lat | geographical coordinates, WGS84 projection | degrees_north | float | N/A | -90 to 90 | 1 |
| lon | geographical coordinates, WGS84 projection | degrees_east | float | N/A | -180 to 180 | 1 |
| or_latitude | Original latitude of the SST value | degrees_north | short | -32768 | -9000 to 9000 | 0.01 |
| or_longitude | Original longitude of the SST value | degrees_east | short | -32768 | -18000 to 18000 | 0.01 |
| quality_level | These are the overall quality indicators and are used for all GHRSST SSTs | N/A | byte | -128 | 0 to 5 | 1 |
| satellite_zenith_angle | The satellite zenith angle at the time of the SST observations. | angular_degree | byte | -128 | -90 to 90 | 1 |
| sea_ice_fraction | Fractional sea ice cover from OSISAF ice product | byte | -128 | 0 to 100 | 0.01 | |
| sea_surface_temperature | Temperature of the subskin of the ocean | kelvin | short | -32768 | -300 to 4500 | 0.01 |
| solar_zenith_angle | The solar zenith angle at the time of the SST observations. | angular_degree | byte | -128 | -90 to 90 | 1 |
| sources_of_adi | This variable provides a pixel by pixel description of where aerosol optical depth were derived from. | N/A | byte | -128 | 0 to 2 | 1 |
| sses_bias | Bias estimate derived using the techniques described at http://www.ghrsst.org/SSES-Description-of-schemes.html | kelvin | byte | -128 | -127 to 127 | 0.01 |
| sses_standard_deviation | Standard deviation estimate derived using the techniques described at http://www.ghrsst.org/SSES-Description-of-schemes.html | kelvin | byte | -128 | -127 to 127 | 0.01 |
| sst_dtime | time plus sst_dtime gives seconds after 00:00:00 UTC January 1, 1981 | seconds | int | -2147483648 | -2147483647 to 2147483647 | 1 |
| time | reference time of sst file | seconds since 1981-01-01 00:00:00 | int | N/A | N/A | 1 |
| wind_speed | These wind speeds were created by the ECMWF and represent winds at 10 metres above the sea surface. | m s-1 | byte | -128 | 0 to 127 | 1 |